Copper Composite Tire Base Elastomer Waterproofing Membrane
Modified Bitumen Waterproof Membrane Description
This product is made of styrene-butadiene-styrene (SBS) block copolymer modified asphaltene.
Green as a coating layer, mixed with chemical root-blocking agent, composite copper foil substrate as a reinforcing layer, the surface is covered with polyethylene membrane (PE) made of a sheet waterproofing membrane with double root-blocking properties.
| Item | Standard Requirements |
| Coil length | 10m,7.5m |
| Coil width | 1m |
| Coil thickness | 4mm,5mm |
| Coil area | 10m,7.5m |
| Upper surface isolation material | Polyethylene film (PE) |
| Lower surface isolation material | Polyethylene film (PE) |
Modified Bitumen Waterproof Membrane Features
1. with the dual function of waterproofing and preventing plant root penetration, able to withstand plant root penetration.
Puncture, and keep waterproof function for a long time;
2. high tensile strength, elongation, can effectively adapt to the grass-roots contraction and deformation and cracking;
3. both anti-root penetration, but does not affect the normal growth of plants.
4. can form a high-strength waterproof layer, strong resistance to pressure water, and resistance to puncture, slightly broken, tearing, fatigue;
Modified Bitumen Waterproof Membrane Composition:
The core of the membrane is made from recycled tire rubber, which provides the elastomeric properties.
Copper particles or copper-coated fillers are incorporated into the rubber-based compound.
The membrane is reinforced with a polyester or fiberglass mat.
The surface is coated with a modified bitumen layer, which can be finished with mineral granules, foil, or other protective layers.
Product Tags:
|
|
Copper Composite Tire Base Elastomer Waterproofing Membrane PE Film Surface Images
|
